The frustration of not even figuring out why your landscape lights have ceased turning on is clear. However, sometimes the solution to restoring strength is much simpler than you might assume. Today, we’re going to delve in the reason why your landscape lighting system has most likely dropped energy.
Prior to starting getting frustrated trying to figure out why your lights aren’t functioning , question yourself, did a snow or rain storm blow shortly before your lighting strategy lost strength? If the response is yes, then then you might need to contemplate checking all your GFCIs.
What is a GFCI?
I’m happy you asked! GFCI stands out for Ground Fault Circuit Interrupter. It’s basically a type of circuit breaker. They are intended to protect against the probability of electric shock. It is intended to turn an electric energy circuit when it detects present flowing in an unintended route. Electric energy flowing as a result of water or a person would both be types of the
This is precisely why it is possible to nearly always see them where electricity and water will be in close proximity to a another. If you should be wondering exactly what they look like, then you are able to locate them in your toilet; the GFCI is on the socket near the sink. You know the little reddish refresh button you’ve got to press some-times when outlet isn’t working? That’s your GFCI!
Restoring Electrical Power For Your Lighting
Now that you know what a GFCI is, what it looks like and how it functions, let us speak about how you can take advantage of this knowledge to restore ability to your picture lights.
Once we have merely heard, water tends to visit a GFCI. And also this includes moisture. We often see GFCIs excursion right after heavy rains or snow storms since there’s far more chances for moisture and water to trip them. A good mis directed sprinkler head may function as the culprit. The next aspect to consider could be the bubble cover over the socket to the transformer. If it is not sealed nicely, or if it’s not closed all the manner it does not doing it’s job to maintain out moisture. If your lighting stop working briefly after a lot of precipitation has happened, then you know just why.
Prior to doing anything else, then check to find out if your lights are getting power into them. Start with grabbing a phone charger and heading outside. Locate your own toaster. Your toaster is your large metal box mounted next into an exterior outlet. Your transformer decreases your 120v down power to 12v for your light system. When you have found your own toaster, disconnect the transformer and then plug into your mobile charger.
If a phone charger is able to control your phone, then you are aware the issue isn’t together with your power. If that is how it is, then it could be best to get in touch with your outdoor lighting practitioner to learn what could be accomplished. In this scenario, the problems are going on inside the lighting method. The energy is not the issue.
However, 9 days out of 10, the outlet will not have electrical power if your lights inexplicably quit doing work. If the outlet doesn’t have power, check to determine if it has a GFCI. It it does, refresh it and assess to find out if the outlet will bill your mobile phone. Assuming that this functions without some issue, then only plug in your back. Check that the timer remains set to the right setting, and you’re carried out.
If the exterior outlet to your transformer doesn’t have a GFCI, then that is completely fine too. You’ll simply need to return indoors and begin looking around for a triggered GFCI somewhere inside your residence. Look carefully and closely. Assess from your kitchen area and bath (places where electricity and water are at near proximity to a another). But in addition extend your research to other places. We’ve discovered GFCIs in garages and usefulness rooms. Heck, there was some moment when we even found a GFCI at the rear of a customer’s coat closet. I really couldn’t tell you , however GFCIs are simetimes at many inexplicable places, therefore look carefully.
After you’ve located the triggered GFCI, push the reset button back in. If the button retains popping out, and a existing is being interrupted by water or somekind of all undersirable get in touch with. You might want to await items to wash outside. But if the switch stays pushed when you flashed it, then return outside to the socket beside your own sanity. Plug in your mobile charger again and find out if it has ability. If the socket has strength, then you’ve discovered which GFCI has been tripped. Get a mental note of the in case your experience a similar problem down the trail.
If you’ve not restored power, try having a look at your breaker board breakers can also trip some-times and need to be reset.
Ultimately, it’s our expectation that this walk on restoring capacity to your outlet can help you bring light back into your landscape.